Repeaters

Extend range and overcome signal obstructions to ensure reliable communication between multiple locations or a single site. Features vary from integrated data applications to analog-digital migration capabilities.

XPR™ 8400 / XPR 8380 REPEATER

Maximize the performance of your UHF, VHF or 800/900 MHz MOTOTRBO system with these repeaters.

Motorola XPR 8380 / XPR8400

Features At-A-Glance

  • 100% continuous duty at 40W/UHF, 45W/VHF and 35W/800 MHz.
  • Supports two simultaneous voice or data paths in digital TDMA mode.
  • Integrated power supply with connector for optional external DC battery backup.
  • Operates in analog or digital mode - bright, clear, colored LEDs indicate mode.
  • LEDs clearly indicate transmit and receive modes in both channel slots.
  • Rack- or wall-mountable - compatible with desktop housing as well.
  • Sturdy handles make installation and handling easier.

Additional Features

  • Automated battery back-up (battery sold separately)
  • Operates in UHF, VHF or 800/900 MHz frequency bands
  • 6.25e Compliant*
  • Dynamic mixed mode capability allows for automatic switching between analog and digital conventional modes
  • Repeater diagnostic and control software provides remote or local site monitoring
  • IP repeater programming uses Internet Protocol (IP) at a central location to complete programming changes and upgrades on remotely located repeaters

Downloads

Brochures

MOTOTRBO Systems At a Glance
MOTOTRBO Two-Way Radios At a Glance
MOTOTRBO Two-Way Radio Solutions At A Glance
MOTOTRBO Connect Plus Brochure
MOTOTRBO Repeater Spec Sheet


Motorola MTR3000™ REPEATER

Motorola MTR3000

100-watt continuous duty station that can operate on MOTOTRBO digital systems as well as analog conventional and LTR/PassPort trunked systems.

Features At-A-Glance

  • 100% continuous duty cycle (Integrated 100W Power Amp)
  • Supports two simultaneous voice or data paths in digital TDMA mode with 16 channels*
  • Operates in UHF, VHF or 800/900 MHz frequency bands
  • Integrated AC /DC power supply
  • Operates in analog or digital mode
  • LEDs clearly indicate transmit and receive modes and overall station status
  • Rack-or-cabinet mountable
  • Front access speaker port for serviceability ease
  • Front access microphone port for routine service
  • Standard USB port for station configuration

Additional Features

  • Convenient access to station ports, shortening installation and maintenance time
  • 12.5 or 25 kHz programmable channel spacing
  • 6.25e Compliant*
  • Integrated 100W Power Amplifier and AC /DC Power Supply minimizes cabling, rack space, expense, and overall complexity
  • Software based design simplifies feature upgrades
  • Power supply functions over a wide range of voltages
  • Automated battery back-up (charger sold separately)
  • Restriction of Hazardous Substances (RoHS) compliant
  • Repeater diagnostic and control software provides remote or local site monitoring
  • Dynamic mixed mode capability allows for automatic switching between analog and digital conventional modes
  • IP repeater programming uses Internet Protocol (IP) at a central location to complete programming changes and upgrades on remotely located repeaters

Motorola MTR3000 Downloads

MOTOTRBO System Spec Sheet
Motorola MTR3000 Spec Sheet
MOTOTRBO Repeater Spec Sheet


MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their respective owners. © Motorola Solutions, Inc. All rights reserved.